• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc handmade pipe 125 pic (good or not)

zanol

zanol

Husqvarna
B Class
I found this pipe on internet, it`s for a 99 125. can you tell me if fits on my wr 125 2000?
I know it´s dificult with pics but can you think they improve anything to the stock ones?
qqqqqt.jpg
 
99 to 2002 are same. there are no 03's and 04 and up is different only in that the pipe /silencer junction is now where the 45 degree upward bend is in the tail end. (left side of the picture and above your nice shoes)
older pipes just need a cut and rework of the junctio to fit.
Joe
 
zanol;82732 said:
I found this pipe on internet, it`s for a 99 125. can you tell me if fits on my wr 125 2000?
I know it´s dificult with pics but can you think they improve anything to the stock ones?
qqqqqt.jpg
Click to expand...

DOMA used to make pipes in that fashion, are you sure its handmade?
 
zanol;82940 said:
yes it is
Click to expand...

For $229 you can get a brand spanking new FMF Fatty in the USA direct from FMF, probably cheaper in an e-store. Even after adding shipping to Portugal it sounds like a better deal.

Changing the expansion chamber (pipe) design is one the single most effective ways to make power on a 2s.
 
It depends on the vintage and style. I've seen some that are total stampings, some half & half and some that were totally cone. Ten year ago they would build customs based off TSR software, but I'm not sure anymore.
 
You must log in or register to reply here.
Back
Top