• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Handlebar clamupps

MikeB

Husqvarna
AA Class
Does anyone know of a set of replacement clamps for my 2012 TXC310 that have the mounting bolt offset so I can move my bars about 1/2 inch forward? I'm 6' and feel like it might help me stay up on the tank. The stock height is fine - I try to ride in a low forward position (I call it my roadrace tuck). Thanks.
 
you should be able to just rotate the stock ones- unless they stopped making them that way?.... Have to take the bars off then loosen the Clamps then turn them 180'
 
I did turn the stockers around but the offset is very small so it didn't do quite enough.
 
Ok. well you probably can't find a different tripple clamp that does that and wouldn't want to spend the money if you did... NOT as common as a request as you may think... if you can't get there with bar bend or bar tilt... than This (below) is the only solution I can find for you: Should work for you- I have never seen any like them and they may be your best simple choice...
http://www.barrisersonline.com/forwardrisers118.html
upandforward.jpg
 
Back
Top