fork seal kit for 09 te310

[hipsterdufus]

do any of these bike have the same 50mm forks as my 09 te250/310? id like to have moose racing seals for my rebuild

http://www.mooseracing.com/pdf/forkseals.pdf

thx
hip

 

[fitness2go]

I would only use OEM (Marzocchi?) fork seals!

 

[rancher1]

The only 50mm fork seals I have seen are the ones motosportz sells.

 

[HUSQVNA]

I've used them ALL over the years, but have to say, the synergyseals have held up the best, and been the most reliable seal I've ever used. Once you get the hang of putting them in, they're very easy to install. Fantastic customer service & support too. Just an other option for ya, but I highly recommend them.

http://www.shop.synergyseals.com/main.sc

 

[hipsterdufus]

I've used them ALL over the years, but have to say, the synergyseals have held up the best, and been the most reliable seal I've ever used. Once you get the hang of putting them in, they're very easy to install. Fantastic customer service & support too. Just an other option for ya, but I highly recommend them.

http://www.shop.synergyseals.com/main.sc

very interesting find, i might have to try these out. thx

 

[fitness2go]

Les at LTR only uses OEM dust seals.

 

[Dirtdame]

do any of these bike have the same 50mm forks as my 09 te250/310? id like to have moose racing seals for my rebuild



thx
hip

All the Husky seals on that list are 45mm seals.

I wanted some white handguards for my TE and bought a full fork seal kit from Motoplastics USA while I was at it. It looks just like OEM. Goes for about 50 bucks.

 

[hipsterdufus]

i emailed synergy on some questions and will order as soon as they email back, the dual lip looks like a must try if it fits my 50mm

http://www.shop.synergyseals.com/product.sc?productId=1&categoryId=2

 

[HUSQVNA]

I think you'll be pleased. Owners name if Rob if not mistaken. Good guy. He's pretty active on the KTM talk site. If you talk to him, you might point him over the Cafe Husky. Maybe he'll offer our fellow Husky riders some kind of introductory offer! Hey... Ya never know unless ya ask....

 

[hipsterdufus]

I think you'll be pleased. Owners name if Rob if not mistaken. Good guy. He's pretty active on the KTM talk site. If you talk to him, you might point him over the Cafe Husky. Maybe he'll offer our fellow Husky riders some kind of introductory offer! Hey... Ya never know unless ya ask....

yeah these seals are crazy, i just installed them tonight and im pumped to give them a long term test. once you get one leg installed its a pretty easy to do, the hard part is removing that teflon strip slowly



and for any of you torque spec freaks like me, the husky workshop manual keeps on telling you to see table 5, table 5, blah blah.........i couldn't find it for the life of me, then i realized they forgot to merge the table from the marzocchi manual to theres

http://www.marzocchi.com/Template/l...330&Azione=Search&IDFolder=180&LN=UK&idC=1561

downloaded as a pdf, and remember its in Newton Meters


hip

 

[HUSQVNA]

Great news. Let us know how they hold up for ya!

 

[HUSQVNA]

How are those seals holding up? Getting ready to put a set in my bike. Preventative maintenance along with an oil change.

 

[bmxerdude2087]

Which of the synergy seals fits the 08 te450 (50mm zokes)??
not sure but this might me it: SFS-0835-R1 MRZ

i dont want to buy the wrong seals

 

[HUSQVNA]

Item #: SFS-0750-R1 is what your after. I sent you a PM.