• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Fork clamp torque for 50mm Marzocchi's ?

D

dirt addict

Husqvarna
AA Class
What do I torque the upper and lower clamps to for the Marzocchi 50mm forks? I looked thru my paperwork but couldn't find anything.....
Thanks.
 
16.5 lbs upper, lower 12lbs. Be sure to start low, then proceed to torque at like 10, 12, 14, then 16.5. 8,10, then 12. Don't go past the torque specs or you'll deform the forks. This is for my 50mm zokes on my TE 510.
 
You must log in or register to reply here.
Back
Top