250-500cc FMF Powercore 2 for 300

[Flyin]

Can anyone confirm this will work with the stock pipe?
The part number is 025012.
I'm looking for a closed course/moto silencer.
Any reviews or pics would be appreciated

 

[MOTORHEAD]

After the phone call I got yesterday I hate to go here, but that should fit your bike. It's actually for the WR250, as I'm sure you know, but it should work on a 300 with the stock pipe.

PC is spec'ing the same parts numbers for the 250 / 300.

 

[sean]

if you change the silencer, do you have to tweak you jet settings?

 

[MOTORHEAD]

You shouldn't need to rejet.

 

[Flyin]

After the phone call I got yesterday I hate to go here, but that should fit your bike. It's actually for the WR250, as I'm sure you know, but it should work on a 300 with the stock pipe.

FMF website shows CR/WR250 '00-'06

PC is spec'ing the same parts numbers for the 250 / 300.

Yea but they are making a 300 specific pipe right?
Do they spec the 250 silencers for that pipe?

 

[PC.]

PC made a 'new' pipe to replace the WR250 pipe they sold through the 2008 model year. The new pipe was designed and sold for both the 250 and 300 as a combo pipe. I spoke to 2 PC employees and was told the same thing.... it is not the same stamping as the previous WR250 pipe.

I bought one for my 300.
Pretty mild pipe. Shifts the power lower into the spread, but feels like it pulls the gears forever cause of the softer delivery. Not a hint of a hit anywhere.

Some will like it and some will not.

 

[Flyin]

So they all interchange, right?
I can use the FMF silencer with the stock pipe or even the Procircuit?

 

[sean]

http://www.fmfracing.com/Request/Contact

give them a call

 

[PC.]

Pro circuit silencer must be used on the PC pipe. Not sure about the FMF, but I have an FMF TCII on my YZ and it uses the stock pipe.

FMF seems to play nice with others. Not sure about PC though

 

[BikeSDP]

Can anyone confirm this will work with the stock pipe?
The part number is 025012.
I'm looking for a closed course/moto silencer.
Any reviews or pics would be appreciated

So did you try to get this and fit 'er up? Happy ending or...?

 

[Flyin]

Got it and fitting it up tonite.

 

[Flyin]

It fit right up

Big weight savings, the end cap-S/A of the stocker must be made of lead.

Sounds the same as stock

 

[BikeSDP]

Thanks for posting that, Flyin. Good to know we have an option. So the sparky version should fit up too...wonder if that'll be longer.

 

[PC.]

Nice. That should save you a few lbs!

You might even feel a little more snap from the bottom now.
Very cool that it fits the stock pipe!

 

[Anthony_1978]

It fit right up

Big weight savings, the end cap-S/A of the stocker must be made of lead.

Sounds the same as stock

looks great

heaps better if you flip your bike with a short pipe.
look what my mate did

THE FOOTAGE>>>http://www.youtube.com/watch?v=jN-ZlNV5ZLo

 

[BikeSDP]

I think your M8 can buff that out

 

[BikeSDP]

It fit right up

Big weight savings, the end cap-S/A of the stocker must be made of lead.

Sounds the same as stock

I ordered the sparky version for my 300 yesterday (025011). Will post up some pics when I get it later this week.

 

[PC.]

THE FOOTAGE>>>http://www.youtube.com/watch?v=jN-ZlNV5ZLo

That was awesome! Your buddy held tough and got the footage of the bike just getting hammered

That was a pretty extreme wheelie for some bark dust. You guys know how to throw down

 

[AttackPug]

All that damage for a little wheelie jeez

 

[Anthony_1978]

That was awesome! Your buddy held tough and got the footage of the bike just getting hammered

That was a pretty extreme wheelie for some bark dust. You guys know how to throw down

Thats how we roll