• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc FMF Power Core mount question

robj

robj

Husqvarna
AA Class
My new FMF silencer just arrived. It doesn't have a rubber mount just a small bolt hole. Do you just bolt these things solid onto the subframe? Would the vibration not damage the subframe tab? What do you guys do - use a rubber washer when you mount them up? Thanks for any pointers.
 
I've used several of their silencers over the years and never had a problem. I think they use that solid mount because of the slip-fit. Many times they do away with the stock springs and this would make a solid mount important. I always use hi temp silicone at the joint too.
 
You must log in or register to reply here.
Back
Top