• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc Float height confusion (TMX WR250 04)

R

Rodrigo

Husqvarna
I read some threads where float height is 20mm for mikuni TMX. I read in sudco.com 20mm too but that carburator (TMX/TMS) is different, it´s not like husq TMX.

Honda CR250 (01,02,03) uses TMX and in service manual float height is 15mm. Looking at the picture it´s exactly like husq carburator but if I set it for 15mm the valve don´t closes and overflow.

I guess, just float is different from husq to honda and float height is different because this. But 20mm is correct? Remember, 20mm in sudco site is for other carburator.

My float looks different from husq and honda float pictures...
 
You must log in or register to reply here.
Back
Top