As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.
When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.
Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.
Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.
Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.
Thanks for your patience and support!
nocontrol;128160 said:Doh! Just read this thread, most likely the same issue I am having that I just posted about. Will check my fuses for cracks and replace them tomorrow.
xymotic;128324 said:FWIW, it's not always the fuses. I had a loose coil wire, I checked everything related to the pump![]()
HuskyDude;128328 said:If you can and you've tried everything else, pulling the pump an applying an external 12 volt DC power source to make sure the pump itself turns is always an option.
![]()
nocontrol;128341 said:Checked my fuses, and one was cracked, not blown. Replaced them all and everything is working fine. Glad I found this thread as it may not have been easy to spot the crack if I hadn't known to look for it.
Thanks, turns out it was the fuse though.
I actually did that before I checked anything else.I just figured bad luck and the pump had gone out since these bikes seem to be notorious with fuel pump issues.
Was it the fuse closest to the rear fender? Just curious, because that is the one that went on mine and several others??????? Did you also ziptie the fuse holder to the subframe? Mine was quite loose with no other way to tighten it and I think it was rattling around on the track, causing the fuse to break......
Go to the auto parts store (AZ, Advance, Oreillys, NAPA, Carquest) and buy the fuses that light up when blown or broken.