• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Fail issue in TE511

trintron321

trintron321

Husqvarna
Hey guys. First poster here.

Thanks for signing me up.

I have TE511 2010 model.

The lighting system was non existent... so i created my own loom behind the headlight. Lights all work great now after doing my own fuses , relays etc all off the ignition switch.

The bike always started an ran well. Always!!

I finished doing the loom. .. then took the bike for a strap up the street. It was perfect!!

Came back... restarted a few times again... to hear that lovely sounding motor... then parked it for the night.

The next day.... wont start!!! Turns over fine... i have all power to fuel pump... etc.

I have noticed when i turn the ignition on...race map ii appears on start up now. Never seen that before... than it dissapears after a few seconds... then fail appears as soon as i hear the injection make a few noises.

Any thoughts or ideas. Very strange how runs fine thf day before.. then this!!!

Thanks everyone for any advice.
 
I would suspect a wiring issue is the cause.
Where did you connect to get power for the lighting and accessories???

The normal dash function is, in order ...
- Key up
- E.... Message (Speedo calibration number)
- Speedo and Race Map II (if the jump plug under the seat is fitted)

Fail is the generic warning for any ecu fault logged
 
You are not going to believe this but I went to the local Husqvarna dealership and I told him the problem went through it exactly. he didn't said have you tried a spark plug. I said... well no... I would if it had been a 2-stroke ....but 4 stroke??? didn't think to do that.... he said try the spark plug it may just fix the problem so I got home put a new spark plug in... started straight away. wow!!!
 
You must log in or register to reply here.
Back
Top