• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

expansion chamber to silenser coupler hose

Somebody told me that you can use the coupler off of a 2000 CR250 Honda but I'm not sure of it.... might be worth investigating...


T
 
My 80 390CR has one, 82 430CR doesn't, Silencer has 1-1/2" od end, & rubber piece
is about 2.00 lg

Husky John
 
THANKS GUYS,

I PLAN ON BUYING A 1 FOOT LENGHT OF 1 3/8 35MM i.d. HOSE AND CUTTING IT INTO 2' LENGHTS AND KEEPING A FEW FOR MYSELF AND SELLING THE REST ON EBAY OR IN HERE. ANYONE INTERESTED IN BUYING ONE?
 
I might be interested in a piece!

How were your seats at A1 last night High Dez...? got to see some pretty wild crashes there in the 2nd Heat race for the Lites...

T
 
highdez1981430cr;140772 said:
THANKS GUYS,

I PLAN ON BUYING A 1 FOOT LENGHT OF 1 3/8 35MM i.d. HOSE AND CUTTING IT INTO 2' LENGHTS AND KEEPING A FEW FOR MYSELF AND SELLING THE REST ON EBAY OR IN HERE. ANYONE INTERESTED IN BUYING ONE?
Click to expand...
You are obviously the same type of carpenter as me. I cut it off twice and it is still too short.:doh:
 
found the perfect size and application here, http://www.hiprospeed.com/ part # HTSC-138 originally designed for turbochargers, temp rated up to 350 degrees, costed me 7 dollars plus shipping, fits perfectly, I didnt even have to trim it down to size.
 
The ones from hiprospeed are china made,the ones i will be making up are made in the UK.

Temp. rating is higher 392 degrees F. or 200 C.

I will sell mine for $6 each or 2 for $10 plus the cost of shipping to you in a USPS small priority box which i believe is $4.95.

I should have it by the end of this week.

I.D. is 1 3/8" and black in color.

I will cut them in lenghts of 2 to 3 inches long per your request.
 
I finally got the hose.

Anyone interested in buying these pipe couplers shoot me a PM.

3" long black high themp. silicone make in the U.K.

1 3/8" I.D.

$6 each or two for $10 plus shipping.
 
You must log in or register to reply here.
Back
Top