• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

ECU Dying ? engine flooded

Juvkam78

Juvkam78

Husqvarna
AA Class
Hi has anyone experienced a ecu sudenly go bad and causing the bike to run rich as f...?
My 2010 TE450 recently refused to start and fouled a plug. Put in a spareplug and was eventualy able to start the bike with a battery booster, the display now showed "fail" and i had to open the trottle to keep it running, and it was running extremely rich with black smoke and sore eyes. Been thru the most of it, intakeboot, tempsensor, etc. The bike had the Special parts ECU so as a last try i put the stock ecu in, idles like a charm and runs pretty fair. Need to reset the TPS but cable is on its way from Scott as we speak. Will hook up the other ecu to read fault codes to, but there will be a few as i have been unplugging different sensors in the troubleshooting.

Juvkam
 
Will do, but funny how it would run rich instead of lean with a bad conection ? But you never know with electronics
 
Having had a TE450, the most likely cause by far is wiring faults. That's why I got rid of it. I was sick and tired of it breaking down, and having to split open the loom to trace chafes, shorts and broken wires. My bike had a new loom under warranty, as there was a recall on the 2010MY, but the replacement wasn't much better.
 
Got the cable today, but so far no luck, I have not put back the special parts ecu yet, will give it a go tomorrow.
Where is the best place to start looking for broken wires ?
 
Juvkam78 said:
Got the cable today, but so far no luck, I have not put back the special parts ecu yet, will give it a go tomorrow.
Where is the best place to start looking for broken wires ?
Click to expand...


Your best bet is to hook up i-beat on the other ECU and read the codes. Then you have targets of wiring to aim at. (assuming it is wiring)
My 450 had wiring faults from end to end of the loom, but the main chunk that deals with most of the FI is around the tank and airbox.
 
Update :Bike is now running good with special parts ecu, no damage to wiring. This ecu had a lot of faultcodes from my troubleshooting unplugging various sensors, the one i cant explain is the code : lambda to high, could it be the restistor or wires to it be failing? Also adjusted co 1 from 105 to 98, probably sett so high because of bike being used at winter in down to -10-15 degrees celsius, also found a loose pink wire in a connector behind the headlight, probably for the e start. So i guess a bad conection was the problem.
Again thanks to Scott at semco designs for suplying the cable, Diagnostics are fun :)

Juvkam
 
I'm not sure what the special parts ECU does? Is it to go with a race exhaust?
The standard ECU has 2 modes - As delivered and corked up with Lambda closed loop control of fuelling, and 'powered up' race mapping which has no Lambda control of fuelling.
Is yours 'powered up'? Mine had a special plug to plug in the lambda wiring to tell the ECU to go to race mapping, and the sensor was removed and bunged. Also removed was the catalytic converter, and throttle restrictor .
 
Tetley said:
I'm not sure what the special parts ECU does? Is it to go with a race exhaust?
The standard ECU has 2 modes - As delivered and corked up with Lambda closed loop control of fuelling, and 'powered up' race mapping which has no Lambda control of fuelling.
Is yours 'powered up'? Mine had a special plug to plug in the lambda wiring to tell the ECU to go to race mapping, and the sensor was removed and bunged. Also removed was the catalytic converter, and throttle restrictor .
Click to expand...

Yes, the ecu was purchased with a race mufler, so i guess it is programed for this, it also has a higher rev.limiter. yes all powered up with cat out and resistor in the lambdaplug
 
If it's powered up, there is no lambda control, so it shouldn't be reporting any bad lambda readings, as it's blind to the exhaust gasses. So, if it's reporting lambda problems, there must be a fault with the resistor plug and or wiring back to the ECU. The special parts ECU probably has the corked up mapping in it, and the fault is tring to revert the ECU to corked mode.
My tilt switch was removed and a resistor plug fitted, and this was constantly causing a FAIL in the dashboard, although it didn't affect running. Eventually I stripped the switch to find really bad crimp connections on the resistor.
 
You must log in or register to reply here.
Back
Top