• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc Do other make wheels fit?

Parfo79

Parfo79

Husqvarna
A Class
I would like a new set of wheels but they are hard to find in the uk for the husky's. There are a few deals around for Jap fitment bikes (no way am I putting any orange parts on her though).

CR125
 
Husky 2t have 150mm wide hubs.
TM Racing is also 150mm wide (really nice hubs, but rare as hence teeth), but axle size is different, and custom spacers will need to be made.

A friend of my had a 2009 to 2011 CRF250 with Husky wheels.
It did fit quite well as far as I could see, haven't measured them but guess he only used custom spacers, and probably replaced the bearings.
 
You must log in or register to reply here.
Back
Top