• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc clutch

  • Thread starter Thread starter mark1
  • Start date Start date
M

mark1

Guest
Hi i have to remove my clutch cover do i have to take the water pump couver of and pump out and power valve centrafugal stuff out or does it just come off compleate with pump still in caseing ??thanks for any help .. .Its a wre but has same as the cr and wr 125
 
Coffee said:
WRE125? What year?
Click to expand...

2011 or newer


Hi i have to remove my clutch cover do i have to take the water pump couver of and pump out and power valve centrafugal stuff out or does it just come off compleate with pump still in caseing ??thanks for any help .. .Its a wre but has same as the cr and wr 125



to remove the clutch cover you don't have to remove any thing else than 5 bolts of the cover that has the little sight glass incorporated.

Robert-Jan
 
I've been wondering this too, for when my clutch goes, robert -jan but when the clutch cover comes off, does the water pump impeller not hold the rest back as it's threaded onto the rod which goes back inside past the cover?
 
Should just pull of with the water pump still attached to the case as there is just a nylon drive gear in the inside that meshes with the crank gear.
 
johhny boy, so if i were to replace my clutch and took the cover off, is the waterpump seal people talk about contained in the clutch cover or is it a little rubber piece further in?
 
In the cover, you wont have to disturb anything unless the seal is shot and the oil is all milky coloured.
 
gazmcfaza said:
see this one, it's the sms and wre engine, see how all the bolts for the oil pump and water pump are one big piece? That's why I thought the wre would need more bolts taking out than the wr as they haven't got an oil pump to worry about
http://www.ebay.co.uk/itm/HUSQVARNA...350?pt=LH_DefaultDomain_3&hash=item2348ac56e6
Click to expand...

We are talking apples and oranges here

the engine from the WRE 2011 and newer is the same as the WR and the CR engine.

It has the a separated clutch cover lid and a inner clutch cover.

the older one has the inner clutch cover and the clutch cover lid together in one piece.

I have no experience with the old type one but it would surprise me that the water pump have to be dissembled completely just to get to the clutch.

its normally a little shaft that has a drive sprocket directly to the crank shaft and the shaft is supported by a small bearing in the same casting of the main bearing.

Robert-Jan
 
I had a look on the older WRE motor parts fiche and the water pump assembly doesn't have to be taken apart, it will simply stick in the clutch cover

the shaft for you oil pump would probably stay in the engine block when you take the cover off and would need a bit of attention when putting it back

if you do it to forceful you might damage the seal.

All with all not a difficult set up and by simply working precise and not forcing things it would be a walk in the park

Robert-Jan
 
R-J van Hulst said:
2011 or newer


Hi i have to remove my clutch cover do i have to take the water pump couver of and pump out and power valve centrafugal stuff out or does it just come off compleate with pump still in caseing ??thanks for any help .. .Its a wre but has same as the cr and wr 125



to remove the clutch cover you don't have to remove any thing else than 5 bolts of the cover that has the little sight glass incorporated.

Robert-Jan
Click to expand...
I need to remove the big couver not the little cover with sight glass
 
mark1 said:
I need to remove the big couver not the little cover with sight glass
Click to expand...

to my understanding there is only one cover with a sight glass, if you need to address the clutch its only this cover and you have full access for what ever you want to do.

Have a look in the file I uploaded a few posts before.

Robert-Jan
 
R-J van Hulst said:
to my understanding there is only one cover with a sight glass, if you need to address the clutch its only this cover and you have full access for what ever you want to do.

Have a look in the file I uploaded a few posts before.

Robert-Jan
Click to expand...
R-J van Hulst said:
to my understanding there is only one cover with a sight glass, if you need to address the clutch its only this cover and you have full access for what ever you want to do.

Have a look in the file I uploaded a few posts before.

Robert-Jan
Click to expand...
Thats a old model mine has inspection cover and a clutch cover the pic u up loadedd is not my wre but the old wre i have 2 covers any way ive had it apart and yer water pump had to be dismantled at least no oil pump its electronic on mine thanks all for trying to help
 
mark1 said:
Thats a old model mine has inspection cover and a clutch cover the pic u up loadedd is not my wre but the old wre i have 2 covers any way ive had it apart and yer water pump had to be dismantled at least no oil pump its electronic on mine thanks all for trying to help
Click to expand...

I am a bit confused now :confused: as the file I uploaded is similar as your engine

Robert-Jan
 
You must log in or register to reply here.
Back
Top