250-500cc clutch kit

[shawbagga]

need new steels/fibres(& springs if a kit) as adjusted internally but still creeping. guessing warped steel. whos the best, cheapest & where to get? are cr500 clutches the same? cheers

 

[lankydoug]

need new steels/fibres(& springs if a kit) as adjusted internally but still creeping. guessing warped steel. whos the best, cheapest & where to get? are cr500 clutches the same? cheers

I think I read that Honda steels are the same if you wanted to only replace the warped steel plates and Honda frictions will fit but are slightly thicker. You can lay the steels on a piece of glass and find the warped ones.

 

[shawbagga]

Ahh Doug you're like old faithful can always count on ya! Seems genuine from motosportz or couple other places is around $100us not sure if that included springs. Some other aftermarkets were similar price inc springs. Just being a tightarse n seeing if could get em cheaper thru Honda was just gonna replace the lot n see if that cures prob otherwise will file clutch basket fingers down as they're slightly grooved. Figured it was due for fibres n steels @225hrs anyway n wouldn't hurt to have spares on hand. If can't get the lot thru Honda I'll just get proper husky kit as freight will kill me otherwise

 

[Eaglefreek]

It been a while, but I used some plates for a Honda. For the life of me, I can't remember the brand and I don't think I replaced the steels. However, the clutch felt better and less drag.

 

[Jhunter]

I bought new plates for my '08 WR250 about 6 months ago. I did a cross reference and my WR clutch was the same as a bunch of the early 2000's Honda 'CR' bikes. bought mine from 'RockyMountainATV.com'

 

[shawbagga]

dont spose you remember what they cost jhunter & the correct part number/s? did you need to order additional steels or fibres or were they correct amounts of each & thicknesses? not sure whether rmatv will ship oem honda to aus(they dont with ktm/husky i think) but ill check it out. cheers

 

[chris anders]

http://www.ebay.com/itm/191707467075?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
not sure if this is a help or not

 

[shawbagga]

yeah i did see that one just not sure how bad the steels are & if theyll clean up ok. not that much cheaper than new though

 

[rancher1]

yeah i did see that one just not sure how bad the steels are & if theyll clean up ok. not that much cheaper than new though

I agree, with the steels looking like that it really is no deal at all.

 

[Jhunter]

Shawbagga - I gave you wrong info. I had to go find my paperwork. I bought a complete clutch kit (fiber & Steel). It came from Appalachian Offroad MC in Charleston West Virginia, phone 304-932-0437. The receipt reads 'OE Husqvarna Clutch WR250/300' Part# 800088966. I paid $79 and free shipping (USA).

Here's their web site: http://www.ktm-parts.com/

 

[shawbagga]

Sweet cheers mate

 

[shawbagga]

Cool jhunter I checked them out they're in stock just gotta see if they post to Oz. If not I'll get onto motosportz mike(might get price off him first to try keep it in house). My airline enforced extended holiday has ruined the savings so may have to wait a month or after Xmas

 

[Sandgroper]

i bought a new r300 clutch and the box said CRF450/WR300 so honda fits as well.