salimoneus
Husqvarna
AA Class
I had the tank off and was looking at all the carb vent lines, and four of them seemed to merge into a single nozzle at the very top near the frame. So figured why not split that cluster apart, and plug a pair into each hose of the filter unit.
Any issues with doing this? It seems like a cleaner install than some of the lower mounted ones I've seen, with the filter unit able to be zip-tied right to the frame, as well as having the open air hose up nice and high just underneath the seat protected from water.
Any issues with doing this? It seems like a cleaner install than some of the lower mounted ones I've seen, with the filter unit able to be zip-tied right to the frame, as well as having the open air hose up nice and high just underneath the seat protected from water.