• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc Bore kit for 125

eric125

eric125

Husqvarna
A Class
- I have a 2002 husqarna wr125 and Im curious what the stock piston size is. I believe I read it's like 53.94. So knowing that can I order just a 54 piston with new ring and drop it in?
And or what is the cheapest bore kit available?


- Also I took the carb off to clean and curious of anyone has a idea of how the vent tubes are ran.. Do they all go to the bottom of the frame? I thought 2 of the Lines on the top went into my air box but can't recall. It's a mikuni tmx carb.



Thank you
 
eric125 said:
- I have a 2002 husqarna wr125 and Im curious what the stock piston size is. I believe I read it's like 53.94. So knowing that can I order just a 54 piston with new ring and drop it in?
And or what is the cheapest bore kit available?


- Also I took the carb off to clean and curious of anyone has a idea of how the vent tubes are ran.. Do they all go to the bottom of the frame? I thought 2 of the Lines on the top went into my air box but can't recall. It's a mikuni tmx carb.



Thank you
Click to expand...
The vent lines should be routed down. I bundled mine together and ran them down through the swing-arm area.
 
You must log in or register to reply here.
Back
Top