• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc bigger tank for wr300

shawbagga

shawbagga

Husqvarna
Pro Class
hi everybody...anyone know if theres a decent larger capacity tank for 2010 wr300 other than the ims one(dont like that gap!) or safari one(too big, like my shrouds!). something around the 12L(roughly 3us gallons i think it would work out to) mark would be good. acerbis or clarke maybe, translucent would be the shot too. 2 strokes got so much room under tank that could be utilized while still maintaining great plug access. im being real picky but would like to keep seat/tank junction flattish similar to stock tank. am i wastin my time searchin and should just keep lugging fuel in my backpack? help my backs gettin sore!
 
The Clarke tank works fine.

Big%252520Tank%252520WR300%252520002small.jpg
 
thanks for the reply, i thought that was the safari tank-my mistake. would like to keep the stock shrouds but will keep in mind
 
I have the same issue. I hate the gap. I ended up putting a piece of foam in there just so it looks filled in. I have seen a pic in the "Post your Pics" section (pg. 4, post #67) of a blue and yellow bike that had the perfect tank. It sits low and covered the huge area above the cylinder. It's how I would want my tank to fit. I'm sure it wouldn't fit with the newer plastics, but it's something to look into. If you find anything, post it back on here please.
 
You must log in or register to reply here.
Back
Top