• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Anybody know the size of the chain tension rollers for 1986?

frog

frog

Husqvarna
AA Class
I want to replace the chain tension rollers on my 1986 Husky 510. The bottom one is 34mm and top one is gone. They are the bigger one's on front part of the the swing-arm,not chain guide rollers.Thanks
 
Jon,
Which ones, the front ones or the pair below the swingarm ? , ones on mine look the same, lower ones are the same as are fronts pair.
Here's picture of mine.
Husky John
 

Attachments

  • 86_husky_510te_41.jpg
    86_husky_510te_41.jpg
    312.7 KB · Views: 7
Yeap i've done the same with 1/2 worn down skate board wheels (as there smaller in dia) & my local Action sports shop gave them to
me for free .
 
This OEM size is 1.5" diameter x .870" width.
Here is Phillip's part at Husqvarna-parts. A little pricey but it's a exact OEM copy made of higher quality material.

$28 with bearings.

tn_IMG_4456.JPG
 
You must log in or register to reply here.
Back
Top