Joedints
Husqvarna
AA Class
I finally fitted my mid 90's sourced PWK A/S to the 300 over the weekend.
First internal setting are 170/42 w/N3EJ needle. Unfortunately within the first few miles I noticed I was running a wide open air screw hole (needle was not present
) so reporting the change will have to wait.... 
but even without the airscrew it still had better bottom and mid and transitioned throughout the revs smoother
Heading to an ISDE fundraiser this weekend then off to vacation...
But so far I have $30 wrapped into it....
Sea level to about 150' above




but even without the airscrew it still had better bottom and mid and transitioned throughout the revs smoother
Heading to an ISDE fundraiser this weekend then off to vacation...
But so far I have $30 wrapped into it....

Sea level to about 150' above