• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc annoyed, broken piece of swingarm

G

gazmcfaza

Husqvarna
AA Class
just checked bike, can't be ridden. If I sit behind the bike looking forward, I can see the swingarm. Well at the back of each side of the arm is a bolt that goes inside the arm, with a hexagon type screw to push the block inside forward to adjust chain slack. Well on the right hand side, the block seems to still be in place, but further back the end of the swingarm is now exposed, with the bolt pretty much all visible, and a piece of metal is wrapped around it halfway down, seems to have shattered. I recall it was hanging off the back, it's a rectangular shaped metal piece that slotted in the back of the swingarm to stop dirt going in I presume. Is there a name for this part? I'm going to drill the remaining piece of it out tomorrow and see if the bolt still functions and pushes the block, but I don't know if that rectangle is needed or is just there to stop dirt/ water getting inside? First picture is the good side on the left, the piece I am talking about is right on the back of the arm with the bolt sticking out. The other two pictures show the exposed bolt and remaining piece of whatever the piece is called :D240120141551.jpg240120141552.jpg240120141556.jpg
 
What year and model is it?. You'll need to get a new piece, I'm pretty surt it act as the "bridge" for the bolt to pull against to move the axle block back. Take it all apart and check the parts over for damage, wire brush everything and grease or antisieze the bolt threads when you reassemble. Do BOTH sides while you're at it and use new bolts, they are probably cheap and you need to order the endcap, anyway!:thumbsup:
 
it's a 2005 wre 125, a bit like the wr 125 only with an oil pump, will give the dealer a call in the morning to see if they have one. I believe I have some identical bolts in my ''stuff box'' . Thanks for the term ''end cap'', it may actually help the dealer know what I'm going on about!
 
I would not hesitate to ride that in the meantime. As long as the axle nut is tight, it keeps the wheel from moving around, not those bolts. Just make sure that the axle is square/perpendicular when you tighten it.

You could probably get away with using a big washer back there in the short term, depending on parts availability, or a piece of aluminum bar stock with a hole drilled in it.

Marc's suggestion about cleaning and lubing everything is a really good one. I have had to chase both of the threads on the adjusters on my 610, and a buddy broke the adjuster bolt on his Yam because it froze up. That area sees a lot of grit and moisture, so corrosion is a real problem.
 
ok thanks for the advice, I managed to find a dealer who had one in stock, should be here with me in a couple of days :D I've also got some axle blocks coming from a low mileage 450 so hopefully they will fit. I will definitely use new bolts in there too
 
You must log in or register to reply here.
Back
Top