• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc '99-'00+ 125 parts interchangability

jason380

jason380

Husqvarna
AA Class
I just purchased a 99 WR 125 which will be a bit of a project as it needs some TLC. So far I've amassed a list of things to replace including levers, shift lever, plastics, and seat cover. My last project like this was my 99 KTM 380 (don't hate the pumpkin!) which I converted to '07 bodywork along with powdercoated frame and swingarm. I'd like to do something similar with this bike. It appears that it may be possible to upgrade to the 04 bodywork for increased choice and availability of graphics by swapping on tank, subframe, airbox and seat. Is this correct?
How about the other things like the pegs, levers, and shift lever? I've found aftermarket parts but it's mostly listed for the newer bikes. I've searched the forums but haven't found a whole lot on the older bikes. Oh ya--I'll post some pictures soon and track the project for you guys.
Thanks!
Jason
 
Short and easy answer is yes. Ive got a 98 125 which is now wearing 2005 plastics using the parts you have listed. Ive also fitted a HGS pipe from a 2002 bike but the silencer needs a bracket made to fit but i will be fitting a new silencer for a 00-05 model.
 
Thanks for the reply, Parfo. The newer the better. Is the most modern I can go 2005? I planned to go to the 2000-2004 stuff but if I can use the next generation that would be even better! I think I'll either go with red and white or blue and white if I can still find the parts.
 
I went for 05 as I came across the parts to do it but like R_Little said, you can go for the 08 stuff too.
 
You must log in or register to reply here.
Back
Top