• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

7602 Racing's Radiator braces on a '14 TE449

Vustadumas

Vustadumas

Husqvarna
A Class
A few weeks back, I had close call when the bike and I took a hard left side spill. Thought I crushed the radiator (I did a bit, but nothing major) so I decided it was time for some radiator braces.

After searching for some time, I decided to give the 7602 braces the nod. Fit is great, look good too. Having one problem though. I can not get my right side plastics back on. The black plastic that attaches to the radiator won't go on correctly, since the braces now get in the way. My question is....

Anyone that's installed these on a te449, did you have to trim your plastic at all? Just wanted a consensus before I go carving it up.
 
Had to take a notch out of mine on each side, not much of a problem at all.
 
You must log in or register to reply here.
Back
Top