• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

630 Flywheel Puller?

S

SimpleOne

Husqvarna
AA Class
So, just bumped into the fact that i need a flywheel puller. I measured it as:
Thread Pitch: 1.5
Thread Typer: External
Thread Major Diameter: 35mm

On that basis I think this is the puller I want:
http://www.motionpro.com/motorcycle/partno/08-0349/
M35x1.5 (Internal Thread)

Can anyone confirm that I'm correct about that?
Also, I know the shop manual suggests using a crankshaft guard with the factory puller tool, any idea if that needed generally, or just for the factory tool?
 
Cool, looks right to me as well. The crankshaft has a crown in the end (presumably to centre a puller) so it should be fine if these operate like most of the other pullers i have lying around (and I assume they would). I'll go ahead and grab one, thanks.
 
You must log in or register to reply here.
Back
Top