• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

610sm not running

ghedunk

ghedunk

Husqvarna
AA Class
Bike ran great when parked , went to start it two day later and only cranks . Bike has no spark and injector not working . Ibeat shows no failures . I was thinking that tilt sensor went bad but ibeat is not green for tilt detected . Anyone have any ideas on where to look ?
It has new plug and coil installed . Fuel pump is working .
With no failures on ibeat its tough . I wish you could test things one at a time with ibeat .
 
How does ecu now motor is turning? I dont remember if there is any cam position sensor or not. If its just in stator,check those wires?
 
ceevu said:
How does ecu now motor is turning? I dont remember if there is any cam position sensor or not. If its just in stator,check those wires?
Click to expand...

Bike has crank sensor . But manual has no test for it . And ibeat has no faults . It sucks that there nothing in service manual . The dam wiring schematic don't even list the crank sensor . I did find it on schematic but they dont indentify it . And yes it is in the stator cover .
 
Br and W at #19.

Capture.jpg~original


.
 
Yes crank senors is open . Halls wants 500$ for part . I found oem in Poland for 233$ . But I would rather just put a new senor in , the stator is fine . Anyone know where a crank sensor can be had ?
 
Hello there!
I am hijacking because as it seems like I have the same problem as you.

That is:
- Bike almost out of the blue started having trouble starting (especially when cold). Had trouble for 1-2 days but managed, 3rd day I could not get it to start at all.
- No faults in spark, fuel, compression.
- Ibeat does not show any errors.

When I start the bike, I can hear the injection pressurizing.
Then I try to start the engine and it turns and turns but does not fire up.

Did you manage to solve your problem after all?
 
First try setting your dash to RPM then crank the motor ... if it shows no rpm your Hall sensor is bad ( pick up ) . Also unplug it and ring it out . Open would make it bad . You cant buy the sensor alone they make you get a new stator . Husqvarna want over 500 $ us for part . I found parts in Poland for 280$ shipped . Just got here yesterday . Took less than a week for shipping .
Ebay motopart77788

Before_May said:
Hello there!
I am hijacking because as it seems like I have the same problem as you.

That is:
- Bike almost out of the blue started having trouble starting (especially when cold). Had trouble for 1-2 days but managed, 3rd day I could not get it to start at all.
- No faults in spark, fuel, compression.
- Ibeat does not show any errors.

When I start the bike, I can hear the injection pressurizing.
Then I try to start the engine and it turns and turns but does not fire up.

Did you manage to solve your problem after all?
Click to expand...
 
Shes alive . Found the time to install crank sensor / stator . Still sucks could not find the crank sensor alone .
 
You must log in or register to reply here.
Back
Top