• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

53T steel sprocket

R

RB7

Husqvarna
AA Class
From some stuff I've read on this forum, a few of you have 53 teeth rear sprockets on your x-lite te 250/310s. I thought I found one on ebay (Sunstar) but when it arrived it was a 52. I think I found an aluminum Renthal, but i'd much prefer a steel one. I should have been suspicious when I didn't see a 53T listed in Sunstar or JT's catalog.
Note: Be careful with vendors on ebay. If you tell some of them that you have a 2011 te250, they jump to the conclusion that you have a modern 2014 Huskatoom te250 and send you a sprocket for that. I don't think they're interchangeable. Where can I get a steel 53T? Anybody got a good one for sale or know of a vendor? Thanks. Does anyone make a chain guide to work well with 52/53T sprockets? I guess I can modify mine...
 
Bingo! Found 'em. JT makes a steel 53T and an aluminum one too (I believe). PBI makes aluminum 53T ones. Easier to find in aluminum than in steel. If you think you can get one from Sunstar, you can't. It's for a 2014 Austrian (not Italian) Husky.
 
JT are notorious for wrong part numbers/models with their front sprockets. Rears should be ok as they all the same
 
According to the JT catalog, the Part number for a STEEL 53 tooth sprocket for an X-lite Husky is JTR822.53 It's the only steel one I know of. Don't put this in stone, cuz the sprocket has NOT arrived to my door yet...
According to the Dirt Works website, it appears that they do NOT make a 53T Ironman sprocket for the X-light--but they do make a 52T rear sprocket.
 
You gotta really dig around on PBI's web site to find this. It looks like they make a lot of aluminum sprockets for pre-KTM Huskies from 38T all the way to 60T! Wow, maybe now I can now get that 1st gear I always wanted---along with a 35 mph top speed!
 
Rebel Gears out of Tennessee can custom make aluminum rears up to 120 teeth. That's nice to know. Looks like we won't run out of sprockets anytime soon!
 
You must log in or register to reply here.
Back
Top