Hi picking up a 2011 511 smr on monday. I have no chance of any close competent Husky dealers close to me. Is the valve clearance check pretty straight forward? Do adjustments involve shims?
one local bike service place says £100+ for valve check which is not really an option. I have never done valves before but I competent enough to start checking myself..Any guides?
Will I know if I have race map 2 installed by read out at start up?
Is bike restricted on the throttle too?
I gather these come out of the box at 40 something HP?
I using this for 8 mile each way commute with fun..mostly 30-40 mph zones so bike should have fairly easy life. I will be sharing the load with my car so hope to keep miles low. It has covered 770 miles so far. These bikes seem very rare in the u.k
one local bike service place says £100+ for valve check which is not really an option. I have never done valves before but I competent enough to start checking myself..Any guides?
Will I know if I have race map 2 installed by read out at start up?
Is bike restricted on the throttle too?
I gather these come out of the box at 40 something HP?
I using this for 8 mile each way commute with fun..mostly 30-40 mph zones so bike should have fairly easy life. I will be sharing the load with my car so hope to keep miles low. It has covered 770 miles so far. These bikes seem very rare in the u.k