• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

38mm mikuni carb jetting for 84 500...

mr stainless

Husqvarna
A Class
ok guys , i've got a new mikuni 38mm carb to go on my 84 husky 500 ... what i'm really after is some idea of jetting sizes to start from ..the new carb is a vm38-9
old one had a 6dh20 needle
new one has a 6dp1 needle
both have the same float mech ..3.3
old main jet is not legible anymore but is definetly bigger than the new one which is 330.
any idea's and help would be much appreciated .
 
Mikuni: 38mm
Main jet: 420
Needle jet: R 2
Idle jet: 30
Needle position: 3 from top
Air jet: 2.0
Needle: 6 DH 20
Air screw: 1 turn from bottom
Slide: 2.5
 
Back
Top