• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc 360 PWK

2premo

2premo

Husqvarna
Pro Class
has anyone put a PWK on a 360?
if so what were you settings
FYI trying to set my 360 for 5000'
 
I'll be taking the Mikuni off of the 2002 WR360 soon and will let you know what I work out.
I'm at 1,450' elevation.
 
NvRider55 said:
I was running a 38 from jd. 45p, 175m, jd biue neddle, 7 slide, as 1.5 out. 4600`. Ran strong, but went the Lectron route.
Click to expand...

thanks for that had a Lectron years ago on my 99, loved it
but putting a decompressor on and have the tube port ready to go
not sure how to do that on a Lectron
 
You must log in or register to reply here.
Back
Top