• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

310 engine compatability

blackdiamond

blackdiamond

Husqvarna
A Class
Hello,

I have a 2011 TE310 with a bad motor. The valves and piston had a fight. I'm thinking of looking for a used motor for a simple swap. Does anyone know if I can put the 2013(red head motor) in my 2011? Will my mikuni FI work ok on the 2013? They say the head is all new. Will the intake an exhaust bolt up?

Thanks.
 
The exhaust from the 2011 won't fit. The engine will bolt right in. The mikuni injection might fit.
If you were happy with the way the 2011 ran I would just rebuild it. I've had the red head 310s and they run ok but the blackhead 310 with the race ecu and 12 port injector ran better in my opinion.
 
Dangermouse449 said:
340X...??

I thought they only made the 300 & 500 engined bikes.
Click to expand...

SWM had this on display at a show a few years ago.
motor-jpg.51336
 
Rode the 630 equivalent. Engine was still tight as was the suspension (0 Kms when I rode it). It did feel very good. Only issue for me was the drastically reduced suspension travel
 
You must log in or register to reply here.
Back
Top