• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2013 Te 310 Europe Starter Motor

A

Antz04

Husqvarna
Good afternoon all, 1st post on here. So thank you accepting my request to join. I’m really struggling with starting issues.

I’ve replaced

Battery
Starter solenoid switch located on frame with 30amp fuse
Checked HT leads to starter and earth.
My valve clearances are .20mm on both exhaust and .010 and .013 on inlet. How close to .016 do I have to get.
Starter motor bushes worn down to copper wire and full of carbon. I can’t find replacement bushes.

Any help or advice will be greatly appreciated. !!!
 
You must log in or register to reply here.
Back
Top