• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2011 TE310 Workshop Manual

Y

yorkie

Husqvarna
C Class
Hi folks,
Here you go, recently picked up my 310 and had the same issues regarding a workshop manual.
Went back to my very efficient local dealer and they came up with this.
<see next post below for correct link>
Hope it helps.
Perhaps it should be a sticky??
 
thumbsup.gif
Down loaded the file today June 19th 2011 .....no problems.

Thanks for the link
 
OK, sorry for any problems.
I have not used file hosting before so it could well be my fault.
I have downloaded it to another hosting site but that will only allow me to send it as an email, I can do that without a hosting site though.
Being a new member I'm not sure but can we PM other members?? If so I will gladly send it to anyone as a PDF file, just tell me how to PM.
Otherwise if you wish to post an email address, probably not your main one, I will send it as an attachment.
Hope this is all OK with the mods??
 
Just bought a used 2011 te310 and I'm new to this forum.
I tried using the above link and could not get it to work.
Can anyone direct me to a link for a shop manual?
Thanx,
Roger
 
Wonderful! I just picked up my 2011 TE310 today. I asked the dealer for the workshop manual and they looked all confused like "Why would you ever want that?" and said they would have to look into getting me one.
 
Thanks************************************************************************************************************************
 
I can get owner manual but can not get shop manual which I need. Do I need to enter http address when I hit link it takes me to goggle document but is empty. Thanks for any help.
 
I had the same trouble also Pedec, just give it some time. I checked back later and it showed up. I think it's just slow downloading such a large file.
 
Just tried again and worked but it was owners manual not shop manual. Can you post shop manual also if you got it thanks
 
I downloaded the workshop manual from the link just above last night and it worked fine. /shrug
 
You must log in or register to reply here.
Back
Top