2010 TC/TE/TXC 250 picture thread, lets see them

[john01]

Darkside you shave the stock seat? BTW congrats on your bike.

 

[Darkside]

yep. that was me. I thought Dan said he had another in the back. Dan gave me a nice repeat customer discount. If course by the time I picked out my goodies I paid twice that.

 

[Darkside]

Darkside you shave the stock seat? BTW congrats on your bike.

That's the seat I shaved from my TE 250. The 08, 09,10 share the same seats. Also, the mid pipe guards are the same.

I did however order the Husky low seat. Curious how long that will take to come in from europe.

 

[rabskyline]

how small is that engine ! wow ! the 510 has no room whatsoever.. that looks like a 2 stroke !! must turn in like a bmx !

 

[raisrx251]

Here are a few pics of my bike, almost done.

[/IMG]

[/IMG]

[/IMG]

[/IMG]

This is it dirty

[/IMG]

This is a video of it getting that dirty
http://www.youtube.com/watch?v=s5zItJcPWcY

 

[fitness2go]

Nice video! Where in Virginia do you live and ride?

 

[raisrx251]

I am in Leesburg VA but usually trail ride near Winchester, VA or Berkeley Springs, WV. I tried shooting a video yesterday but was on the wrong settings, 14 inches of snow in most places. Needless to say we did not travel very fast.

 

[fitness2go]

I used to live in DC (10 years)...you guys are getting blasted by snow this year!

 

[mxer74]

Pics

A few random shots. I am still currently building this bike / putting parts on so it is far from done. Some parts already installed that aren't pictured are ASV levers, Renthal Twinwall bars, Renthal bar mounts, Sunline misc. pieces, TM chainblock, Husqvarna step seat, TONS of Ti bolts, Boyesen QS3, Ironman Sprocket w/ Ti bolts, and stainless steel brake line. Still waiting on a couple major items such as the Ohlins TTX shock, complete Husqvarna Hard Parts triple clamps, and a bunch of misc. carbon fiber pieces (along with some custom oversize aluminum radiators that are currently being made). Thought I would share a few though:

Carbon Kevlar mud flap

Ohlins Cartridges (still waiting on those Husky triple clamps)

P3 Skid plate and HGS header

HGS Endcap

Fork Tubes

New Bolts......

Zip-Ty Brake Pedal

Project 321 Gas Cap

Front View

 

[Motosportz]

Is that Honda plastic!!! For shame.

Superfarkle.

 

[elliott-rider]

here is some pics of my te 250. sorry the pics are small!!

zeta bark busters

 

[mxer74]

Nope, not Honda plastic on my bike. It came packaged and said for Honda CRF/Blake's Husqvarna TC 250............so nope not a shame. Haha

 

[kleemann]

Nope, not Honda plastic on my bike. It came packaged and said for Honda CRF/Blake's Husqvarna TC 250............so nope not a shame. Haha

 

[Wadman]

The TC.

Krieg, I hate to tell you but you have your triangle stand on the wrong side of the bike!! Unless you are a southpaw.

 

[krieg]

Nope, not Honda plastic on my bike. It came packaged and said for Honda CRF/Blake's Husqvarna TC 250............so nope not a shame. Haha

Blake, where'd you get the HGS exhaust?

 

[mxer74]

Halls Cycles and the best part is they can get them in less than one week!

 

[krieg]

Halls Cycles and the best part is they can get them in less than one week!

Do you like it? What does it do to the power?

 

[krieg]

Krieg, I hate to tell you but you have your triangle stand on the wrong side of the bike!! Unless you are a southpaw.

It's the right side for the 2010's. The left rear axle hole is about twice the diameter.

 

[Motosportz]

It's the right side for the 2010's. The left rear axle hole is about twice the diameter.

your axle is in backwards then.

K

 

[Wadman]

It's the right side for the 2010's. The left rear axle hole is about twice the diameter.

I was just kidding with Kreig but now he knows he has a left handed axle.