• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc 2009 WR 125 plastic

scov

scov

Husqvarna
AA Class
I would like to replace the upper and lower rad shrouds on my 2009 wr 125. I hope to use the OEM 2010 or 2011 in mould graphics shrouds if possible.Can anyone confirm that the 2010 or 2011 plastic will fit my 09? I am using the IMS large tank which I beleive fits both the 09 and 10 models but not sure about the 2011. I prefer the look of the 2011 shrouds if they fit.
 
I got a set of 2010 plastics from a buddy who ordered them for his 4 stroke. They didn't fit his 08 250 but did fit my 09 125. They were for the 2010 TC/TXC 250. I've gone back to the stock shrouds because the upper and lower shrouds seem to mate a little better. I'm running the IMS tank and man does it make the plastics and seat fit like crap.
 
Yes, they should fit fine. We have both an '09 and '10 and the plastic is interchangeable between them.
 
slo rider said:
I got a set of 2010 plastics from a buddy who ordered them for his 4 stroke. They didn't fit his 08 250 but did fit my 09 125. They were for the 2010 TC/TXC 250. I've gone back to the stock shrouds because the upper and lower shrouds seem to mate a little better. I'm running the IMS tank and man does it make the plastics and seat fit like crap.
Click to expand...

I know. I had to grind the plastic down on my seat pan just to get the seat to latch in. The upper and lower shrouds will not stay together. Thinking I might try screwing them together.
 
You must log in or register to reply here.
Back
Top