• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

2006 610SM wheels to a 2000 610Te

Fritzcoinc

Fritzcoinc

Husqvarna
AA Class
Anybody know if a set of 17" SM wheels from a 2006 610SM could be adapted to fit a 2000 TE610e? I see from Hall's hub and axle pn's for 2006 and 2000 SM's are not the same. I can do machine work if need to make this work.
 
rancher1;137978 said:
The axle size is smaller in the 2000 models.
Click to expand...

All these questions because someone is selling 06 SM wheels on EBay.
Yup, the front axle is smaller on the 00 vs the 06.
My 2000 TE610e has a 20mm front axle and 25mm rear axle.
From Hall's an 06SM has 25mm front axle and 25mm rear axle.
It looks like you could use a different size bearing in the fromt with a 20mm ID ( 6004 ) but it is 3mm wider than std. brg. ( 6905). This would mean the snap ring on the brake side could not be used and the 06 seals could not be used. Anybody think ya gota have these? The bearings would be rubber sealed.
 
You must log in or register to reply here.
Back
Top