• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

1995 te350 rebuild options

silverstreakNZ

Husqvarna
Pro Class
Just picked up a 95 te 350 for dirt cheap . Dropped a valve at idle .
Piston is cracked . And needs a valve seat or a head .
Can I throw a 410 cylinder and piston straight on it ?
 
You could throw a 610 engine straight in it!

Seriously though, the 350 has a 57.5mm stroke, the 410 has 60.8mm stroke so you would have a VERY low compression engine unless you fit the 410 crank assuming it fits into 350 cases.

Tony
 
Oh that sucks . I thought they might have shared a crank and just changed bore .
What power at rpm was claimed for this bike ?
 
Screenshot_20190706-214525_Drive.jpg
They both have a 63 mm stroke . They share heads and most other bits .anyone else got much yo say on either ?

I think when you googled it you got the bore n stroke for a 2014 350 . They are 57.7 x 88
 
Back
Top