Mogly406
Husqvarna
AA Class
I know this has been asked before, but I couldn't find a definitive answer... any sources for the non-power valve piston? I just sent HVA an email, but I don't see any on their website. The bike I just picked up has the original bore (piston stamped 66.44), but the skirt is cracked. I'm not sure if it needs a bore or if I will get away with stock piston size and a light hone.
If no sources are available, is it possible to fit an '86 top end and crank on this motor? I happen to have a spare '86 motor with corroded cases that would be a good donor for parts. I see in the parts manuals that the '86 and '87 have different engine case part numbers, so don't know if this is possible though.
If no sources are available, is it possible to fit an '86 top end and crank on this motor? I happen to have a spare '86 motor with corroded cases that would be a good donor for parts. I see in the parts manuals that the '86 and '87 have different engine case part numbers, so don't know if this is possible though.