• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

1982 WR 125 Carby.

2T_vs_4T

2T_vs_4T

Husqvarna
AA Class
Hi,
I purchased a 1982 WR 125 off ebay, it wasn't complete, missing a carby and a few other parts. So seeing that I have to find a carby for the WR, what do the Husky Experts recommend I go for, do I stick with the Bing, go for a Mikuni (easy to source and get parts) and what size should I use. Stick with the 32mm, or go for a 34mm or even a 36mm. I know there are many options, just after some thoughts on the different ones available.
 
LOOK PICTURES:)
1 Keihin 35 mm HONDA CR
2 Mikuni 36 mm
( spécial PRO-CIRCUIT )
3 Bing 32 mm and 1983 pipe 125
(my WR 1982 )

Y préfère for me MIKUNI 36 mm
and pipe HUSQVARNA 1983 !
 
Hi visiteur1948,
Thankyou for your reply, good to see someone else with a interest in Husky 125's.
I don't have the CR barrel, with the larger reed valve and I have the 82 WR pipe, so mine is like photo1 and 3, so I'm thinking of going the Keihin 35 mm off of the Honda CR. Have you tried the 82 WR pipe, I know it's fairly basic the 82 WR pipe, what difference did the 83 pipe make to your WR 1982 ?
 
motor CR 1982
= motor CR and WR 1983
mix possible ! picture two !

picture one pipe
original and KEIHIN 35
=good motor !
for enduro !

picture two
= 1982 CR good motor
mikuni carb 38 mm !
for MX ! spécial pro-circuit

picture tree
my WR mix 1982/1983
pipe 1983/BING carb
2.80 needle jet
y prefère for enduro !
smile.gif
 
In the first photo with the 35mm Keihin, what rubber intake boot is used, is it the same as used with the Mikuni on the CR.
Do you have any other photos of that setup from a different angle.
 
Copie de 101593_05_md.jpg

no excuse me picture one motorcyle is sale
but is HONDA CR 125 rubber !

but look picture
this motorcyle sale ebay motors have
MIKUNI 38 mm and pipe YAMAHA ? SUZUKI ?
HONDA ?KAWASAKI ?
 
SAM_2303.JPG
SAM_2303.JPG

other motor ( at me ) and picture today
rubber original HUSQVARNA
carb BING 32 /84 original HUSQVARNA 125 /1982
carb MIKUNI 38 TM HUSQVARNA 125 / 1983
 

Attachments

  • SAM_2301.JPG
    SAM_2301.JPG
    123.2 KB · Views: 20
You must log in or register to reply here.
Back
Top