• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

11' TE 310 Tail signal replacement

Benton360

Benton360

Husqvarna
Hello all.. I was wondering if anyone knew of any low profile rear blinkers to replace the lofty OEM ones. I have ripped off two already this riding season!
 
http://www.cafehusky.com/threads/tail-light-for-2012-te-310-turn-signals-too.25881/

I had a 2008 that came with a nice tail-light for enduro...maybe Edge. You can cut down the stock tail-light section and re-mount the plate. There are some LED stalks for turn signals and I've even seem some flush mount ones used .... not sure where those come from. Sometimes there can be an issue with needing a new Flasher because of the LEDs.

I'm pretty sure a LOT of guys have taken off the stockers so you could probably get those mailed to you for postage and keep yourself in stock lights for a decade or two.;)

Here you go, story on the flashers and pics of the flush mounted signals....so maybe ask the guy where he got them....
http://www.cafehusky.com/threads/led-relay-will-a-3-lead-relay-work.13436/#post-124548

https://sicassracing.com/store/prod...t_flasher_led_turn_signal_flasher?cPath=46_54

rear only led flashers don't need the smart flasher. all 4 and you do.
 
Here's mine, $25 from cycle gear. Wired straight and only blink slightly faster.

4eea3163.jpg


adf3666a.jpg
 
Glangston,

Thanks for all the valued information. I checked out the sicassracing.com site you had reccommended yesterday and ordered a pair of there flush mount blinkers. I never ordered the relay, so i'm hoping they work well! Perhaps you would know where I could pick up some OEM plastic at? I'm finding it difficult to find certain OEM parts for my Husky.:confused:

Catang5oh,

I have cut down my tail section similiar to yours. What exactly did you do with your license plate light? I thought about remounting it between the brake light and the plate, but figured the light emitted from the brake would be sufficient? Also, what tire combination do you find works best for about 90% dirt riding. I just ordered a pair of Pirelli Scorpion Pro All Terrain/ Enduro, and i'm hoping for the best.

I'll post pictures soon!


Alert today, Alive tomorrow!
 
I just rely on the brake light for the tag. So far I have been burning up the Karoo that was stock, I can't take off a good tire till it's toast. Next will be a set of Maxxis 6006 I have hanging innthe garage, got them cheap so we will see.
 
You must log in or register to reply here.
Back
Top