• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

250-500cc 100 hr rebuild "10 300

jaxsplatt

jaxsplatt

Husqvarna
AA Class
100 hr rebuild of linkage and swing arm, (allballz rebuild kits) as there was quite alot of movement. Bottom shock mount swivel bearing was non exsistant and the replacment one is quite different so hope it should last longer than stock.
The piston and rings were fine, no carbon build up so going richer on the needle as it was running lean.
I ordered a wossner after hearing of good reports but i'm pretty dissapointed that there is not a rolla bearing that fits the gudgon and crank. I took it to good machenist who widned the bosses and I ordered same bearing as stock Husky one. Extra $100 bucks.. mmm maybe should have ordered Husky after all.
Cant wait to throw a leg back ova!!!

Oh and mate ova the road just recieved his '14 300 six days ( pumkin soup)
So we both gotta run our bikes in.. I WANT POWER BAND !!!
 
I hope the allballz linkage/swingarm bearings are longer lasting than there wheel bearings(packed with proper grease too!) cos they were utter poo. gotta grease em couple times a year I reckon, my lower shock bearing is always destroyed regardless though. get em from the local bearing shop, jap quality much better than chinga crap. yeh my 10 300 is due another top end now at almost 200 hours(ish). reckon will go wossner too. gotta get her replated while im at it. hope the bottom end is still all nice & tight cos don't plan on doing that till 250-300 hours. oh well got the 125 to play with while the big girl is out of action! :)
 
shawbagga said:
I hope the allballz linkage/swingarm bearings are longer lasting than there wheel bearings(packed with proper grease too!) cos they were utter poo.
Click to expand...

Agreed... after about 10 hours on allballz front wheel bearings i wanted to rip them out and some quality jap stuff in
 
You must log in or register to reply here.
Back
Top