'09 TC450 Aftermarket Exhaust?

[nzengineer]

Hey guys,

I've got an '09 TC450 and as a result of a 3rd gear wheelie that went a bit far, I'm chasing some options for aftermarket pipes (slip on or full system).
Been struggling to find any listed for the bike. Leo Vince were the only company i found with one.
Any suggestions or help would be appreciated.

Cheers,

 

[demi]

saw some Jardine exhausts on the online auction site. don't know anything about them though.

 

[sp4ce]

Arrow

Arrow makes a full Ti system.

Can't link into their stupid flash site, so you'll have to find it yourself: http://www.arrow.it/eng/website/


Would that fit a TE, or are there critical differences?

 

[glangston]

I'm pretty sure George has got the pipes, the fitment may be something else but he's certainly set up to do this in his shop. 1 714 540-2920 Uptite Racing.

 

[snoplw]

the fmf slip on for an 08 works with a little fitting 1. enlarge end of pipe to fit exisitng mid and re locate the mounting location on pipe works great

 

[HUSKYnXJnWI]

the fmf slip on for an 08 works with a little fitting 1. enlarge end of pipe to fit exisitng mid and re locate the mounting location on pipe works great

I have never seen an FMF for a 2008. I have seen them for 2009-10. If you have a link please attatch- My buddy still has the stock can on his 2008 TE510- and a FMF would be great- if it exists.

 

[andyman]

I'm pretty sure George has got the pipes, the fitment may be something else but he's certainly set up to do this in his shop. Uptite Racing.

regrettably, he's an and a crotchety old man. Of course that's just my opinion...

 

[PeterHB]

You got Arrow, Akrapovic and Doma.

 

[danbartol]

Have a look here:

http://www.cafehusky.com/forums/showthread.php?t=6723

Page-3, post #60

I did a bit of exhaust testing on my 2010 TE-510

 

[ScottyR]

I just sent back 2 FMF 4.1 mufflers. They do NOT fit on a TC450, regardless of what FMF tells you. They were designed for a TXC450 which uses a different mid pipe than the TC does.

 

[HUSKYnXJnWI]

I know its one more part to buy- but if the midpipe is different on a SM-TE and TC-TXC- can't you just buy the coresponding midpipe? This assumes the headpipe is the same.... and I don't know what a midpipe costs. But then it would open up a new set of options- which may be worth it if limited otherwise.

 

[MXRider]

the midpipes are very hard to find, believe me I tried. they run about $130 for the steel TE pipe.
FMF only lists the pipes on their site now to fit 09-10 TE510.

is the midpipe different between a TE450 and 510? I wouldnt think so, but you never know.

if anyone needs exact measurements on the powercore 4 muffler, part # 045293, let me know.
I have one on my 09 SM450R.

 

[So Cal SM450R rider]

You can also check the Husqvarna Special Parts catalog. In it they have a full ti system and slip on for the TC, TE, and SM's. All the pipes in it are Arrow's. I don't have it in front of me right now, (its at home) but they have the part numbers listed with it.