• 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

125-200cc 02 CR125 cable routing...help

racemx904

racemx904

Husqvarna
Pro Class
I got this thing and it has a few hookie things....

jetting is rich as hell....ordered new jets...

few nuts and bolts missing...

the clutch cable is routed really weird...The husky i had way back in 02' i put a hydraulic on it and dont remember how it went....

i see a little clip on the down tube for it....cant figure out if it goes inside the frame by the pipe to get there or outside...

see a clip on right side of the frame for it...but does it go in front of triple clamps or behind....

right now i have it inside the frame and in front of clamps....still dont look right....
 
Starting at the lever, it goes between the handle bar and cross brace down the right side of the frame around the front of the frame through the y in the down tubes under the power valve drain tubes
to the cable bracket. Got it.
 
You must log in or register to reply here.
Back
Top