1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc WR360 Decompression Head

Discussion in '2 Stroke' started by flyingbob, May 15, 2024.

  1. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    This head came on my 2002 WR360.
    I've had the RD head from Australia and it was completely different.
    This looks like the port and boss were cast as an original factory item.
    Part number on the head is 73356.

    9F796B56-0913-47F3-BB24-52DED8559902.jpeg
    rancher1 likes this.
  2. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    73356 is a standard head number
    that is wild
  3. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    I totally agree...
  4. Sonnie Mee Husqvarna
    A Class

    Location:
    England
    Husqvarna Motorcycle:
    Team Motorex Husqvarna CR125
    Never seen that before unless it was an enduro team part or specific to the American market
  5. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    Nothing special like that to the American market.
  6. SmokeyExpress Husqvarna
    AA Class

    Location:
    Canberra Australia
    Husqvarna Motorcycle:
    2014 WR300, 1996 WR360,2013 WR125
    I've seen that mod before. A boss is welded on the side of the head. Head is jig drilled, relieved, boss is drilled and tapped. Welded area is the die ground to blend and then a nice bead blast to give that factory cast look. Its a great mod and looks to have been nicely done!