Wheel Spacer Dust Covers -NEW!

Discussion in 'Zip Ty Racing' started by Huskynoobee, May 29, 2017.

  1. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    From the race shop to you. These revolutionary dust covers offer a simple solution to an all too common problem. Wheel spacers are there to keep the front wheel centered but they always want to jump out when you're trying to slide the axle in. They also seem to have a way of attracting dust and grit that wear both the spacer and the dust seal, and eventually the bearings.

    PROBLEM SOLVED!

    f0827c5b-b5d3-43a7-b8f5-9767eca051fa.jpg

    • Made of Derlin Plastic for precision, light weight, low friction, and durability

    •Simple press fit that makes installation fast and easy

    •Wheel swaps have never been this easy - keeps the spacers in place

    •Keep dirt and grime away from your seals and bearings

    •Fits all Husqvarna and KTM with the "small" 20mm axle

    Only $19.95 a set


    https://ziptyracing.com/products/ktm-husky-front-wheel-spacers-dust-cover
  2. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    OK, so I've got you interested, but how do they look you ask?

    2017-05-29 13.03.14.jpg

    Factory Sexy! Why they don't come standard is beyond us. Get yours today. Don't forget your Cafe Husky discount CH10
    dartyppyt and Trenchcoat85 like this.
  3. ghte Contributing Member

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    Do they fit SWM's and Beta's too?
  4. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Not sure, they are made to snap on to the OEM KTM/Husky spacer. So depends on the OD and ID of the Beta/SWM spacers. We made these for the race bikes to test before sale. There are plans in the works to make other versions, so stay tuned.