Tc 250 fork rebuild help.

I have a 06 tc 250 with marzocchi shiver forks ,I put new seals on the forks and added oil and felt no dampening in rebound and once full extended can feel the plunger in the cartridge hitting the top of the cartridge as there was no oil in there. how much oil goes into the cartridge? I've tried to pump the oil in with the dampening rod and no luck. Do I feel the cartridge manually ?if so how much? Thanks for the help

You have to get oil into that dampening rod. Hold your finger over the top to create a vacuum effect so that you can pull oil in while you pump the rod. Hope this helps.

Andrew