1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Speed bleeders

Discussion in '4 Stroke' started by frankietheyankee, Jun 27, 2017.

  1. frankietheyankee Husqvarna
    AA Class

    Location:
    USA, New Jersey
    Does anyone know what sizes for '06 TE250?
    frankietheyankee, Jun 27, 2017
    #1

  2. vmxwinn Husqvarna
    AA Class

    Location:
    East of San Francisco, Danville CA
    Husqvarna Motorcycle:
    CR500,CR430,XC430,OR250,WR400,TE250
    Other Motorcycles:
    To many to list
    Any M4 X 0.7mm bleeder. I have some cheap eBay ones and the are perfectly great.
    vmxwinn, Jun 28, 2017
    #2

  3. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    hey vmx, how sure are you of that bleeder size? (not that I know) I'm asking because M4 seems pretty small, and I'm not even sure I've ever seen a bleeder that size.

    I like speed bleeders and I fit them on lots of vehicles.
    Trenchcoat85, Jun 29, 2017
    #3

  4. vmxwinn Husqvarna
    AA Class

    Location:
    East of San Francisco, Danville CA
    Husqvarna Motorcycle:
    CR500,CR430,XC430,OR250,WR400,TE250
    Other Motorcycles:
    To many to list
    Pretty sure as that is the size I bought for my 07 TE. Pretty much the same forks as the 06
    vmxwinn, Jun 29, 2017
    #4

  5. frankietheyankee Husqvarna
    AA Class

    Location:
    USA, New Jersey
    Should have been more specific. I am asking about bleeders for brake calipers.
    frankietheyankee, Jun 29, 2017
    #5

  6. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    My bad- I was thinking brake bleeders.
    Trenchcoat85, Jun 29, 2017
    #6

  7. Trenchcoat85 Husqvarna
    Pro Class

    Location:
    Northern NorCal
    Husqvarna Motorcycle:
    '14 TE 310R
    Other Motorcycles:
    '85 shovel, '75 DT400, '97 XR400
    hey frankie... you've been a member since 2009 and you're still on probation? That could be a new record! I joined in '10 but didn't post until the end of '14 when I got my own husky (and I didn't get approved for a while)

    I'd say: "welcome" but you got here a year before me.
    Trenchcoat85, Jun 30, 2017
    #7