SM610 speedo no worky

Discussion in '610/630' started by R_Little, Aug 18, 2014.

  1. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    My '06 610 Speedo stopped working.

    I suspected the pick-up cable but the odometer still works?

    What is up with that?
  2. Theo Husqvarna
    AA Class

    Location:
    Lombardy, Italy
    Husqvarna Motorcycle:
    SM 610 I.E.
    Other Motorcycles:
    2001 YZ250
    It happened to me, too. My instrument has a blue background light; yours should have the amber light, so maybe there are some other differences and maybe what I did won't work with yours.
    Following a piece of advice read on forums, I disconnected the battery cables and, after some minutes, I connected them back. The speedo has been working properly since then.
    Someone suggests that you also connect the two cables to each other to create a short circuit, but I didn't try it and I suspect it could damage the bike (but I don't know much about electronics).
  3. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Makes sense.

    The speedo is a mico-processor like a computer.

    Must need to be re-booted!

    No, I wont short it!
  4. JonXX Administrator

    Location:
    Bill's Motorcycles Plus
    Husqvarna Motorcycle:
    360CR 360WR SM610 TC450 TXC250 TC250
    Other Motorcycles:
    Hondas, Harleys, Yammys & a squid
    Don't short it.

    It's a known "random thing" (without explanation) and widely published about the 610 dashes.

    Disconnect the negative battery cable from the battery, count to five, reconnect and you're on your way. You *can* disconnect both cables and put them together (without the battery connected at all) momentarily, but it isn't necessary with these systems.