1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

All 2st Scott's Stabilizer Mount

Discussion in '2 Stroke' started by 2premo, May 15, 2022.

  1. 2premo Husqvarna
    Pro Class

    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    I have a 1998 360 that I would like to install my Scott's stabilizer on
    I don't really want to weld on my frame
    I had a 99 that I replaced the front end as in triple clamp down with a 2004 assembly
    I see the parts are somewhat interchangeable, what I am hoping is someone can answer this
    I am looking at a kit that mounts the stabilizer low and raises my bars a bit, I ride a lot of rocks and on the pegs a lot, so this would be a good fit


    this is a 2004 kit, but I have the stabilizer


    these are the 2006 parts I am looking at
    will these fit? don't need to fit perfect, I can modify a bit
    seems the steering head and the basic upper triple is similar if not the same basic but a slight bore change, has anyone done anything similar????