2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
Discussion in '2 Stroke' started by Coffee, Dec 28, 2008.
How did you manage to pull that one off?
Took four of us to pull it out, and was not easy.
Look like solid ground to me.
But I usually get myself in a jam every week .
Just joined the Cafe. Bought a well-cared for 2011 WR300 last year and love it. Rekluse auto-clutch, Pro Circuit pipe and silencer, forks done by Pro Circuit. Been an awesome bike so far.
Nice Bike Man!! I love the white & Blue color scheme!!
I got a 10' WR300 with Rekluse 3.0. Awesome woods bike!!
She was a great bike.
Going to restore to original, gotta do a frame off restore.
Was one of my favorite.
Going to go old school Blue and Yellow with a retro graphics kit. pretty much replacing ALL the plastic including air box, inner fenders etc.
Piston, clutch basket, redo suspension etc. will be like new next year!!
Decided to keep my TXC449.
....but , sorry guys going to pick up a NEW YZ250X on Monday, Almost 2k cheaper that a leftover TE250 (white KTM) Husqvarna.
post some pix later
Went riding on Saturday, February 2, because the temperatures and conditions seemed to be improving in northwest New Mexico. There were four of us on this ride. It is a single track trail most of the way from just north of Aztec, New Mexico to just below the Colorado line. Total loop is about 23 miles. About two thirds of the way the trail drops into a narrow wash, about six feet across and 8 to 10 feet deep. This is when we ran into snow that hadn't seen any sunlight to melt it off. Some drifts were about 2 1/2 feet deep with a deep mud foundation. After struggling for a half mile we decided to get up on a parallel road to continue only to find out it was deep mud also. After talking it over we decided to turn around and head back on the road until we got to some better single track conditions. Needless to say each bike probably picked up 20 pounds of mud along the way. It was still a fantastic day that helped cure our cabin fever.
...what is wrong
yamaha gear on an Italian Husqvarna.
I was going to say rear sag adjustment?
Time to get some new gear Jean!!
I agree with "wrx,
Wow... beautiful. Great job, Crocus!
looks very nice!
What is this for a front fender?
YZ250 I think it was 2014, Ive had the mudguard for ages, only just got around to fitting it. I'm not sure it's at the right angle, its a tad high at the front but should be ok.
Thanks MotoChuck, I.ve seen yours ...... nice graphics kit.
Looking good Crocus. Are those fresh upper rad shrouds? Having trouble finding new white ones. Busted one at my last race.
Yes, all new plastics. Found the white shrouds advertised for a 125 and different year (06-08, mines 11), took a gamble and they fitted.
Here's my 2011 WR 250 on my 1st ride of the season (March 30, 31). I ended driving home through a nice snow storm. #isitspringyet ?