All 2st new to me 93 CR360

Just purchased this bike last week and trying to figure a few things out. Frame number is 4A *050214 and engine is 200164. Cannot find anything on the net to id it but pretty sure it is a 93CR360. Cylinder is toast, so wondering if a WR360 cylinder will fit and work? I could get the original re sleeved? but only found WR sleeves, not sure it would work. Also, It has scribed on the cylinder MOTRACK RP3891. All I have found is a company in England they may have done some work. bike is in OZ!!! Cheers

there actually was a resource on here for 1992-2002 360 and all the cross reference of years and parts
seems to be missing when I click on it

http://www.cafehusky.com/threads/part-cross-reference-listings.27544/

these are on excel as a spread sheet, I might have them or maybe someone else kept them

pretty sure the cylinder was only 1 design
and FYI, not a sleeve, but a coating, yes they can be repaired
interested in seeing your porting compared to a stock cylinder

any pics of your bike?

cheers for that, but not much on the CR360. It says it should be an 8A frame but mine is 4A.
love to find a parts listing for the 93 CR360 to compare a few things like cylinders, rods etc, make buying a little easier!!

sorry no pics atm. in a million bits atm!! lol

https://www.halls-cycles.com/images/PDF/Husqvarna .PDFs/1990-1994/93_wxc-wxe_250-360.pdf


https://www.halls-cycles.com/images/PDF/Husqvarna .PDFs/1990-1994/93_cr_250-360.pdf

Champion Prob is, I cannot read the part numbers for the crank page, think I have worked it out but will keep looking for a cleaner set

Wr cylinder will work.

I think he was trying to find out if it had a different part number and porting

He would need a European parts pdf since they were not imported to North America. I would guess the cylinder would be ported differently and possibly the power valves different as well.

are you sure?
a friend in Reno had one, and there is a parts fiche for it