New Clutch kits 5 and 6 spring with steel plain plates - coming soon!

We have been working with an OEM Husqvarna supplier to produce new Clutch kits that will contain steel plain plates. We are often asked for these, as they contaminate the oil less. We aslo have new Bronze 4t plate sets coming! We have taken this opportunity to fix the old issue of the clutch hub and pressure plate wearing by adding steel plates to these faces too. You will need to tidy up your pressure plate and hub so the steel plain plate sits against it flat, but it will be worth it as it may be the last clutch you need to buy!

Andy Elliott

Ill let you know after the weekend at Farleigh as the 5 hundy has a set fitted...

IN STOCK AT LAST!!!

WE HAVE MADE THESE KITS WITH STEEL PLAIN PLATES AT BOTH ENDS, SO YOU DO NOT WEAR OUT THE CLUTCH HUB AND PRESSURE PLATE. IT IS NECESSARY TO MAKE SURE THE PRESSURE PLATE IS COMPLETELY FLAT AND THAT THE FIRST PLAIN PLATE TO GO ON THE HUB SITS FLAT AGAINST IT. IF IS DOES NOT (DUE TO THE WEAR RIDGE) YOU WILL NEED TO MOD THE HUB LIKE THIS:

Any spring kits for the 6 spring clutch yet Andy?

MMM - I will work on it!

Andy

What is the cost for a complete kit for a 1984 500cr? Steels, frictions, and springs.
Thanks, Joe

Check out the website for prices...

www.hva-factory.com Use the search engine on the site to find what you need...

Andy

Hi Andy,

Nice job, extra friction disc cures weak clutches! Steel friction discs stops oil contamination and clutches last longer!

Cheers, DaveM.